Product Detail
ZX44GST4-M-SFP
4 Port gigabit +4 Port 10G SFP L3 Managed Industrial Switch
Rack mounted Aluminum Industrial Switch
ZX44GST4-M-SFP switch is a high performance 4 Port gigabit + 10G SFP+ L3 core switch. It provides Static routing and dynamic routing with advanced hardware processing capacity. The machine adopts modular design, which supports up to 4 Port 10G SFP+, and retains the expansion ability to further support 10GE when realizing gigabit convergence or access. It supports IPv4/IPv6 hardware double stack and line speed forwarding, so that customers can easily cope with the coming IPv6 era, which provides high capacity exchange capacity. ZX44GST4-M-SFP switch has the operating temperature of -40℃ ~ 85℃, has the super firmness to adapt to all kinds of harsh environment, can also be very convenient to install in the machine room cabinet. The rack-mounted characteristics and wide temperature operation make the switch a plug and play industrial-grade device, providing a reliable and convenient solution for users to network their Ethernet devices.
Strong processing ability
ZX44GST4-M-SFP switch is based on the powerful and stable
processing power of VCore-III MIPS-based CPU
ZX44GST4-M-SFP provides up to 1.2Tbps of switching capacity
port full speed filtering and forwarding 406Mpps
To ensure that the trunk network of large traffic data without blocking
Forwarding.
Product features:
● Data control: Supports 802.3x full-duplex flow control and
network storm suppression
● Redundant network: supports STP, RSTP, MSTP and ERPS
● Redundancy backup: supports the virtual route redundancy protocol VRRP
● Multicast management: Support IGMP Snooping V1, V2, and V3
● VLAN: supports IEEE 802.1Q vlans to effectively isolate broadcast domains
Link aggregation: Support static/dynamic link aggregation, provide perfect bandwidth utilization
● QOS: Support COSDSCP, 4 queues, support WRRSP scheduling mode
● Security management: Security management: supports ACL and 802.1x
● Management: Supports WEB, CLI, and SNMP management
Monitoring and maintenance: Support port mirroring, interface status monitoring, log management
Specifications:
| Model No. | ZX44GST4-M-SFP |
| Interface | 4-Port 10/100/1000Mbps RJ45
4-Port 10G SFP+ (compatible with 1000M/2500M/10000M) 1-Port console |
|
Performance Specification |
Bandwidth(switch capacity): 1.2Tbps
Packet Buffer Memory:32Mbit Packet Forwarding Rate: 406Mpps MAC Address Table: 32K |
| Installation | Bracket mounted |
| Maximum Frame Size | 10240bytes |
| Flow Control | Back pressure for half duplex, IEEE 802.3x pause frame for full duplex |
| Enclosure | IP40 Aluminum housing |
|
LED Indicator |
POWER: Red
RUN: Green Fiber: X1~X4(Green) Ethernet: Green |
| Power Input | DC 12V -52V |
| Power Consumption | < 15watts |
| Surge protection | ±4KV |
|
Network Protocols |
IEEE 802.3ad, link aggregation protocols
IEEE802.3 10BASE-T; IEEE802.3i 10Base-T; IEEE802.3u;100Base-TX/FX; IEEE802.3ab 1000Base-T; IEEE802.3z 1000Base-X; IEEE 802.3ae,10G IEEE 802.3x, Full duplex Ethernet data link Laminar flow control IEEE 802.3az,EEE high efficient ethernet |
| Network cables | 10BASE-T: Cat3,4,5 UTP(≤100 meter)
100BASE-TX: Cat5 or later UTP(≤100meter) 1000BASE-TX: Cat6 or later UTP(≤100 meter) |
|
Industry Standard (EMC 4) |
FCC CFR47 Part 15,EN55022/CISPR22, Class A
IEC61000-4-2 (ESD): ±8kV (contact), ±12kV (air) IEC61000-4-3 (RS): 10V/m (80~1000MHz) IEC61000-4-4 (EFT): Power Port: ±4kV; Data Port: ±2kV IEC61000-4-5 (Surge): Power Port: ±2kV/DM, ±4kV/CM; Data Port: ±2kV IEC61000-4-6 (CS): 3V (10kHz-150kHz); 10V (150kHz-80MHz) IEC61000-4-16 (Common mode conduction): 30V (cont.), 300V (1s) |
| Certification | CE FCC Rohs compliance |
| MTBF | >300,000hours |
| Dimensions (W x D x H) | 143 x 125 x48mm |
| Weight | Product Weight: 0.7KGS
Packing Weight: 0.8KGS |
| Working Environment
|
Working temperature: -40～85℃ ;
Storage temperature: -40～85℃ Relative Humidity: 5%~95 %( no condensation) |
| Warranty | 1-year replacement with new item; 3-years for main parts. |
Reviews
There are no reviews yet.